- Face weld
- 16-gauge Galvannealed (A40) steel standard
- 7-gauge hinge reinforcements standard
- 12-gauge for closers standard
- Rust-inhibitive prime coat ANSI/SDI 250.10
- Any manufacturer’s hinge locations
- Any manufacturer’s strike prep location
- Anchors to meet all wall construction
- Any width and height
- Any jamb depth
- Independently tested in accordance with SDI-113 and ASTM C1363 for thermal performance using Door Components thermally insulated doors
- Thermal Break assembly U-Factor = 0.37 vs standard frame assembly U-Factor = 0.44 (using same door and seals)
Material Options
- G90 galvanized
Feature Options
- Continuous weld
- Single lite Borrowed Lites also available
Hardware Reinforcements
- Optional prep to accept all manufacturers’ hardware requirements
