- 1 3/4″ standard; other thicknesses available
- Any manufacturer’s hinge locations
- 18-gauge A40 galvannealed steel standard
- ANSI A250.8 Model 2, continuously welded vertical edges (seamless) standard
- Rust inhibitive prime coat meets ANSI/SDI A250.10
- 20-gauge stiffeners spot-welded at 6″ on center with thermafiber insulation
Material Options
- 16-gauge, 14-gauge, 12-gauge
- A60, G90, CRS
- 18-gauge stiffeners optional
Feature Options
- Channeled lite cutout or integral lite option
- Flush top cap
- Any manufacturer’s deadlock prep, panic prep, and mortise sectional trim
- Flat bar astragal (pairs)
- Up to 3 hour fire label
- Integral louver option
Hardware Reinforcements
- 3/16″ for hinges
- 12-gauge for locks standard
- 14-gauge for closers standard
- Heavier gauge reinforcements available
